ダイス形状が引抜き棒材表層部の残留応力に与える影響

DOI Web Site Web Site 被引用文献1件 参考文献6件

書誌事項

タイトル別名
  • Effect of Die Geometry on Residual Stress at Surface of Drawn Bar
  • ダイス ケイジョウ ガ ヒキヌキ ボウザイ ヒョウソウブ ノ ザンリュウ オウリョク ニ アタエル エイキョウ

この論文をさがす

説明

Recently, bars for office automation and automobile industry have been required to achieve high fatigue strength. Generally, tensile residual stress is generated at the surface layer of a drawn bar after the drawing process. The tensile residual stress at the surface layer reduces fatigue strength. Therefore, decreasing in tensile residual stress is required. In this study, the effects of approach geometry and bearing length on the residual stress were investigated. Next, the residual stress of the bar drawn using a new die, which had a protrusion in the bearing area, was investigated. Consequently, the effective approach geometry for decreasing tensile residual stress was determined. Tensile residual stress decreased with increasing bearing length. Additionally, it was clarified that the compressive residual stress is generated during drawing with a protrusion die.

収録刊行物

  • 塑性と加工

    塑性と加工 54 (634), 998-1002, 2013

    一般社団法人 日本塑性加工学会

被引用文献 (1)*注記

もっと見る

参考文献 (6)*注記

もっと見る

キーワード

詳細情報 詳細情報について

問題の指摘

ページトップへ