多孔質金属繊維焼結板のプレス加工

書誌事項

タイトル別名
  • Press Forming of Porous Sintered Metal Fiber Sheets
  • タコウシツ キンゾク センイ ショウケツバン ノ プレス カコウ

この論文をさがす

抄録

In this paper, we discuss the possibilities of burr-free blanking and deep drawing of sintered metal fiber sheets. In the blanking, the experimental results showed that a conventional blanking technique can reduce the height of the burr under the conditions of small tool clearance. However, there is still small burr. Then, the authors proposed a new method that can realize burr-free blanking of the sheet. The method proved to be effective also for the dimensionally accurate blanking of the sheet. In the deep drawing, it was found that a technique using a die with a fixed blank holder can realize high-aspect-ratio drawing of the sheet. Moreover, with the use of the holder, a deep-drawn product with no defect like folds can be produced consistently by making the gap between the blank-holding plate and die nearly equal to the thickness of the sheet to be drawn.

収録刊行物

  • 塑性と加工

    塑性と加工 50 (584), 857-861, 2009

    一般社団法人 日本塑性加工学会

被引用文献 (1)*注記

もっと見る

参考文献 (12)*注記

もっと見る

詳細情報 詳細情報について

問題の指摘

ページトップへ