Press Forming of Porous Sintered Metal Fiber Sheets
Bibliographic Information
- Other Title
-
- 多孔質金属繊維焼結板のプレス加工
- タコウシツ キンゾク センイ ショウケツバン ノ プレス カコウ
Search this article
Abstract
In this paper, we discuss the possibilities of burr-free blanking and deep drawing of sintered metal fiber sheets. In the blanking, the experimental results showed that a conventional blanking technique can reduce the height of the burr under the conditions of small tool clearance. However, there is still small burr. Then, the authors proposed a new method that can realize burr-free blanking of the sheet. The method proved to be effective also for the dimensionally accurate blanking of the sheet. In the deep drawing, it was found that a technique using a die with a fixed blank holder can realize high-aspect-ratio drawing of the sheet. Moreover, with the use of the holder, a deep-drawn product with no defect like folds can be produced consistently by making the gap between the blank-holding plate and die nearly equal to the thickness of the sheet to be drawn.
Journal
-
- Journal of the Japan Society for Technology of Plasticity
-
Journal of the Japan Society for Technology of Plasticity 50 (584), 857-861, 2009
The Japan Society for Technology of Plasticity
- Tweet
Details 詳細情報について
-
- CRID
- 1390282681476762368
-
- NII Article ID
- 10025409910
-
- NII Book ID
- AN00135062
-
- COI
- 1:CAS:528:DC%2BD1MXht1yksr3L
-
- ISSN
- 18820166
- 00381586
-
- NDL BIB ID
- 10447897
-
- Text Lang
- ja
-
- Data Source
-
- JaLC
- NDL
- Crossref
- CiNii Articles
-
- Abstract License Flag
- Disallowed