3次スプライン降伏関数およびその異方硬化モデルの提案

書誌事項

タイトル別名
  • Plane Stress Yield Function Described by 3rd-degree Spline Curves Considering Differential Work Hardening
  • 3ジ スプライン コウフク カンスウ オヨビ ソノ イカタ コウカ モデル ノ テイアン

この論文をさがす

抄録

An anisotropic plane stress yield function that is described by 3rd-degree spline curves has been proposed. To fix the parameters for the model, three types of mechanical tests are needed. In this study, only uniaxial tensile tests at several angles from the rolling direction have been carried out, because stress states of the target for comparison are uniaxial stress in this case. The characteristic of this model is that the calculated flow stresses and r values fit the experimental values in all directions. Also it has been expanded to represent the differential work hardening model and the thickness measured experimentally is compared with the thickness simulated by the hole expanding test. The results of the experiment are almost in accord with the result of the simulation by the proposed method. There is little difference between the results of the differential hardening model and conventional hardening model in this case.

収録刊行物

  • 塑性と加工

    塑性と加工 57 (662), 245-251, 2016

    一般社団法人 日本塑性加工学会

被引用文献 (3)*注記

もっと見る

参考文献 (5)*注記

もっと見る

詳細情報 詳細情報について

問題の指摘

ページトップへ