Development of Plastic Joining Method Using Indentation
Bibliographic Information
- Other Title
-
- フランジ付軸部品の植込み接合法の開発
- フランジ ツキ ジク ブヒン ノ ウエコミ セツゴウホウ ノ カイハツ
Search this article
Abstract
A new plastic joining method of fixing bars with a hot forged plate is proposed. The bars at room temperature are directly joined to the high-temperature plate using a press. The optimum conditions of the proposed plastic joining method are examined using SCM435 bar and S45C plate on a mechanical press. By adjusting the indentation pressure to below the yield stress of the bar at room temperature during plastic joining, it is possible to attach the bar to the plate without buckling or fattening the bar. The bonding stress (shearing stress) between the bar and the plate is obtained in the range of 70-160 MPa depending on the die clearance, plate temperature or plate thickness. The bonding mechanism of the proposed plastic joining method is discussed from the viewpoints of adhesion of the bar-plate and the clamp stress associated with the thermal stress of the plate.
Journal
-
- Journal of the Japan Society for Technology of Plasticity
-
Journal of the Japan Society for Technology of Plasticity 49 (567), 316-320, 2008
The Japan Society for Technology of Plasticity
- Tweet
Details 詳細情報について
-
- CRID
- 1390282681476824064
-
- NII Article ID
- 130004488139
- 10020479040
-
- NII Book ID
- AN00135062
-
- ISSN
- 18820166
- 00381586
-
- NDL BIB ID
- 9492654
-
- Text Lang
- ja
-
- Data Source
-
- JaLC
- NDL
- Crossref
- CiNii Articles
-
- Abstract License Flag
- Disallowed