Structures and Mechanical Properties of Semi-Solid Formed AC9B Aluminum Alloy.
-
- Ohnishi Satoshi
- 長岡技術科学大学大学院〔現 旭テック(株)〕
-
- Sekihara Kazutoshi
- 同大学院〔現 信越化学(株)〕
-
- Hirata Koushirou
- 同大学院
-
- Kamado Shigeharu
- 同大学 工博
-
- Kojima Yo
- 同大学 工博
Bibliographic Information
- Other Title
-
- 半溶融成形加工したAC9Bアルミニウム合金の組織および機械的性質
- ハン ヨウユウ セイケイ カコウシタ AC9B アルミニウム ゴウキン ノ ソ
Search this article
Abstract
Semi-solid press-forming process is applied for AC9B aluminum alloy in order to suppress the floating of primary Si by press-forming at semi-solid state and to improve the mechanical properties by refining eutectic Si. By heating 15% strain-introduced bulk specimen, a microstructure is able to be obtained in which nearly spherical aluminum solid solution and primary Si distribute uniformly. Furthermore, eutectic Si becomes finer than that of as cast specimen due to rapid cooling. Tensile strength of the press-formed specimen from room temperature to 473K are more or less equal to those of as cast specimen because cracks occur in primary Si. The strain-introduced bulk can be injected into cavity with thickness of 1mm at the semi-solid temperature, and the spherical aluminum solid particles, primary Si and eutectic phases distribute uniformly in the formed specimen.
Journal
-
- Journal of Japan Foundry Engineering Society
-
Journal of Japan Foundry Engineering Society 69 (4), 316-322, 1997
Japan Foundry Engineering Society
- Tweet
Details 詳細情報について
-
- CRID
- 1390282681482904448
-
- NII Article ID
- 10003800180
-
- NII Book ID
- AN10514770
-
- COI
- 1:CAS:528:DyaK2sXjtl2qt7c%3D
-
- ISSN
- 21855374
- 13420429
-
- NDL BIB ID
- 4194333
-
- Text Lang
- ja
-
- Data Source
-
- JaLC
- NDL
- CiNii Articles
-
- Abstract License Flag
- Disallowed