水溶性ナイロンを添加したインベストメント鋳造用尿素樹脂の被削性

DOI

書誌事項

タイトル別名
  • Machinability of Water-Soluble Nylon Added Urea-Resin for Investment Casting

抄録

  Machinability of water-soluble nylon added urea-resin was examined. It was excellent with respect to cutting force and tool life with the exception of surface finish. The material was very fragile in machining and was prone to damaging surface finish and precise edge formability. The followings are the proper machining conditions; Nose radius of the cutting tool in turning should be larger than 5mm, and the point angle of the drill less than 80°. Feed rate and effective cutting depth should be as small as possible. Cutting speed of more than 100m/min in turning and that of more than 6m/min in drilling are preferable. In milling, the up-cut is better than the down-cut operation.

収録刊行物

  • 鋳物

    鋳物 56 (3), 157-162, 1984

    公益社団法人 日本鋳造工学会

詳細情報 詳細情報について

  • CRID
    1390282681484105728
  • NII論文ID
    130004564364
  • DOI
    10.11279/imono.56.3_157
  • ISSN
    21860335
    00214396
  • 本文言語コード
    ja
  • データソース種別
    • JaLC
    • CiNii Articles
  • 抄録ライセンスフラグ
    使用不可

問題の指摘

ページトップへ