Melting and Recrystallization Behavior of Polytetrafluoroethylene
-
- HANEDA Tsuguo
- Kyoto University of Industrial Arts and Textile Fibers
-
- KIYOSE Atsunobu
- Kyoto University of Industrial Arts and Textile Fibers
-
- TAKAHASHI Juzo
- Kyoto University of Industrial Arts and Textile Fibers
-
- NOMURA Haruji
- Kyoto University of Industrial Arts and Textile Fibers
-
- KUROKAWA Masataka
- Kyoto University of Industrial Arts and Textile Fibers
Bibliographic Information
- Other Title
-
- ポリテトラフルオロエチレン生テープの融解,再結晶時の挙動
- ポリテトラフルオロエチレンセイ テープ ノ ユウカイ サイケッショウジ ノ キ
Search this article
Abstract
To clarify the structure of polytetrafluoroethylene (PTFE), a raw film made by compressing and rolling PTFE dispersion particles was examined using thermal analysis, X-ray diffraction and electron microscopy. In the PTFE raw film, granular PTFE particles are in contact with one another; wideangle X-ray diffraction shows their orientation. This orientation diminishes during sinering, but a clearer orientation reappears by cooling. The band structure with striations aligned parallel to the rolled direction appears on the fracture surface for samples prepared at low cooling rates. As the sintering time becomes longer, the oriented structure changes into an unoriented structure. Thermomechanical analysis shows that the PTFE maintains its‘memories’of before it was sintered, even in the melt, for a long time. To clear the ‘memories’ thoroughly, sintering at 450°C, or at 370°C for a longer time than 2hrs is necessary for the raw film.
Journal
-
- KOBUNSHI RONBUNSHU
-
KOBUNSHI RONBUNSHU 40 (6), 383-391, 1983
The Society of Polymer Science, Japan
- Tweet
Keywords
Details 詳細情報について
-
- CRID
- 1390282681499166336
-
- NII Article ID
- 130004034127
-
- NII Book ID
- AN00085011
-
- ISSN
- 18815685
- 03862186
- http://id.crossref.org/issn/03862186
-
- NDL BIB ID
- 2596613
-
- Text Lang
- ja
-
- Data Source
-
- JaLC
- NDL
- Crossref
- CiNii Articles
-
- Abstract License Flag
- Disallowed