Demonstration of Plasma Window with 20 mm Diameter and Pressure Separation for Accelerator Applications
-
- IKOMA Naoya
- Nishina Center for Accelerator-Based Science, RIKEN Graduate School of Engineering, Nagaoka University of Technology
-
- MIYAKE Yasuto
- Nishina Center for Accelerator-Based Science, RIKEN
-
- TAKAHASHI Mamoru
- Nishina Center for Accelerator-Based Science, RIKEN
-
- OKUNO Hiroki
- Nishina Center for Accelerator-Based Science, RIKEN
-
- NAMBA Shinichi
- Graduate School of Engineering, Hiroshima University
-
- TAKAHASHI Kazumasa
- Graduate School of Engineering, Nagaoka University of Technology
-
- SASAKI Toru
- Graduate School of Engineering, Nagaoka University of Technology
-
- KIKUCHI Takashi
- Graduate School of Engineering, Nagaoka University of Technology
この論文をさがす
説明
<p>A large diameter plasma window was developed for accelerator applications. In this study, a pressure separation using the plasma window was demonstrated, and the maximum diameter of the plasma window reached up to 20 mm. The prediction formula based on the viscous flow for confinement pressure cannot be applied in the case of large diameters due to low input power density to the plasma.</p>
収録刊行物
-
- Plasma and Fusion Research
-
Plasma and Fusion Research 14 (0), 1206148-1206148, 2019-10-09
一般社団法人 プラズマ・核融合学会
- Tweet
詳細情報 詳細情報について
-
- CRID
- 1390282752357086208
-
- NII論文ID
- 130007740790
-
- ISSN
- 18806821
-
- 本文言語コード
- en
-
- データソース種別
-
- JaLC
- Crossref
- CiNii Articles
- OpenAIRE
-
- 抄録ライセンスフラグ
- 使用不可
