書誌事項
- タイトル別名
-
- Study of Carbon Nanotube Synthesis and Dispersion using Arc Discharge in Foam Made with a Surfactant
- カイメン カッセイザイ オ モチイタ アワ チュウ アーク ホウデン ニ ヨル カーボンナノチューブ ノ ゴウセイ
この論文をさがす
抄録
<p>Relative to the vacuum method, there are drawbacks to the underwater arc discharge method, including weak discharge intensity, low discharge sustainability, and low production volumes of CNTs. Likewise, there are also disadvantages to the arc discharge method in foam as the method requires additional distillation processes to eliminate the beer foam after the production process in spite of its advantages. This study, therefore, investigates an alternative method by replacing the conventional beer foam, used for the discharge location, with foam made from a surfactant (SDS). Experimental results indicated that CNTs can be produced feasibly and efficiently in the same way as in the conventional beer foam method. Further studies were performed to determine whether CNT synthesis and dispersion processes are carried out simultaneously when the CNTs, produced by the arc discharge in SDS foam, are dispersed in the SDS.</p>
収録刊行物
-
- 混相流
-
混相流 32 (2), 254-259, 2018-06-15
日本混相流学会
- Tweet
詳細情報 詳細情報について
-
- CRID
- 1390282763022145024
-
- NII論文ID
- 130007402441
-
- NII書誌ID
- AN10088286
-
- ISSN
- 18815790
- 09142843
-
- NDL書誌ID
- 029128497
-
- 本文言語コード
- ja
-
- データソース種別
-
- JaLC
- NDL
- Crossref
- CiNii Articles
-
- 抄録ライセンスフラグ
- 使用不可