[Updated on Apr. 18] Integration of CiNii Articles into CiNii Research

<b>Supersonic Flow Conditions for Two Connecting Two-Phase Flow Nozzle in Pressurized Dissolution Method</b><b> </b>

DOI
  • NAUNG Khine Tun
    Department of Engineering Mechanics and Energy, University of Tsukuba
  • MONJI Hideaki
    Department of Engineering Mechanics and Energy, University of Tsukuba

Bibliographic Information

Other Title
  • Supersonic Flow Conditions for Two Connecting Two-Phase Flow Nozzle in Pressurized Dissolution Method

Search this article

Abstract

<p>A two-phase converging-diverging nozzle is a device converting the thermal energy of a liquid-gas flow at the inlet to the kinetic energy of supersonic flow at the outlet. The pressurized dissolution method is one of the micro-bubble generation methods, by reducing the pressure of the water after the water had been saturated with gas under a high pressure. In the previous study, the pressurized dissolution method using a converging-diverging nozzle was used to generate a supersonic flow but it didn’t succeed. Therefore, the pressurized dissolution method was modified by connecting two converging-diverging nozzles in the present study. The aim of connecting two nozzles is to generate a two-phase flow before the downstream nozzle because one nozzle makes only single phase flow at the throat. As increasing the CO2 dissolved gas rate, the many bubbles were generated and the void fraction also increased but the liquid velocity decreased at the throat. Therefore, the study shows the proper condition to obtain a supersonic flow.</p>

Journal

Details

  • CRID
    1390282763072664576
  • NII Article ID
    130007538836
  • DOI
    10.11395/aem.3.0_92
  • ISSN
    2424175X
    21894752
  • NDL BIB ID
    029207890
  • Text Lang
    en
  • Data Source
    • JaLC
    • NDL
    • CiNii Articles
  • Abstract License Flag
    Disallowed

Report a problem

Back to top