微小パターンのシート材打抜き用マイクロテクスチュア金型の創製

DOI Web Site Web Site 被引用文献1件 参考文献7件

書誌事項

タイトル別名
  • Microtexturing into AISI420 Dies for Fine Piercing of Micropatterns into Metallic Sheets
  • ビショウ パターン ノ シートザイ ウチヌキ ヨウ マイクロテクスチュア カナガタ ノ ソウセイ

この論文をさがす

抄録

<p>Fine piercing of micropatterns into metallic sheets has become an engineering issue in the stamping industries. Plasma nitriding-assisted printing was proposed as a solution for forming a microtextured surface on die materials. AISI420 die material was employed for this plasma printing. First, maskless patterning was used to print two dimensional micropatterns onto a mirror-polished AISI420 stainless steel surface. The unprinted surface area was selectively nitrided; the negative micropattern of the original prints changed to nitrogen supersaturated AISI420 areas. This die surface was dipped into 20% HCl solution for chemical etching. Since the nitrogen supersaturated areas had high corrosion resistance against this etching, only the printed parts were selectively etched, leaving a hardened AISI420 punch head after etching. These selective nitriding characteristics were demonstrated in experiments. A cylindrical punch array with a diameter of 50 mm was fabricated as a punch for piercing microtextures into thin AISI304 stainless steel sheets.</p>

収録刊行物

  • 塑性と加工

    塑性と加工 60 (698), 53-57, 2019

    一般社団法人 日本塑性加工学会

被引用文献 (1)*注記

もっと見る

参考文献 (7)*注記

もっと見る

キーワード

詳細情報 詳細情報について

問題の指摘

ページトップへ