ローラーピッチング試験機の計装化

書誌事項

タイトル別名
  • Instrumentation of roller pitting machine

抄録

<p>As a method for evaluating the pitching fatigue characteristic on the gear tooth surface, a roller pitting test is commonly conducted. In this test, a pair of cylindrical test pieces are under the rolling-sliding contact condition with high surface pressure. Conventionally, the test piece was removed from the testing machine during the test and the damage was observed. However, there are possibilities that different parts may come into contact with each other due to installation errors. Therefore, it is difficult to observe accurate damage phenomena. Therefore, in this study, we constructed a system for observing the cylindrical surface on a roller pitching machine and showed its usefulness. We succeeded in observing the surface of pieces at 140 time, magnification.</p>

収録刊行物

詳細情報 詳細情報について

問題の指摘

ページトップへ