アルミナ―マグネシア質不定形耐火物の機械的特性に及ぼす微粉添加および焼成温度の影響

書誌事項

タイトル別名
  • Effects of Fine Alumina Addition and Sintering Temperature on Mechanical Properties of Alumina-Magnesia Monolithic Refractories
  • アルミナ-マグネシアシツ フテイケイ タイカブツ ノ キカイテキ トクセイ ニ オヨボス ビフン テンカ オヨビ ショウセイ オンド ノ エイキョウ

この論文をさがす

抄録

<p>Alumina-magnesia monolithic refractories are mainly used to line the inner wall of steel ladles. The refractories are damaged by the thermal shock while using on its wall and the spalling of them occurs. Therefore, it is very important to evaluate the thermal shock resistance of refractories. The effective fracture energy (γeff) is known as the parameter which affects to the thermal shock resistance. The objective of this study is to identify the effect of adding fine particles on the γeff. The samples were prepared by changing the fraction of fine alumina (average particle size is 3.4 µm) against coarse alumina (average particle size is 550 µm) and the effect of adding fine particles on the γeff was evaluated. The γeff was measured by Work of Fracture method. The value of γeff was enhanced to a maximum when the fine alumina fraction was 20-30 mass%. The reason could be explained by the apparent porosity and the roughness of the surface. Adding appropriate amount of fine alumina brought lower apparent porosity and rougher surface, leading to higher γeff.</p>

収録刊行物

  • 材料

    材料 68 (7), 559-563, 2019-07-15

    公益社団法人 日本材料学会

被引用文献 (1)*注記

もっと見る

参考文献 (1)*注記

もっと見る

詳細情報 詳細情報について

問題の指摘

ページトップへ