書誌事項
- タイトル別名
-
- Shortening in Resin Impregnation Time during VaRTM and Interlaminar Toughening for FRP and FML by introducing Mesh Layers
抄録
<p>To shorten the resin impregnation time of fiber metal laminate (aluminum alloy/GFRP laminates) during VaRTM process, mesh layers made of polyamide (PA) are inserted between aluminum alloy and GF layers. The resin impregnation experiment with fiber optic sensors has shown that the resin impregnation time is shortened due to the out-of-plane flow to the PA mesh via the circular holes in the metal layer which are introduced so that a resin distribution medium can be adapted to the VaRTM process for FML. The resin impregnation behavior was also clarified by control volume / finite element analysis. Drop-weight impact tests for the FMLs fabricated by VaRTM process show that higher energy is absorbed during impact loading by the laminates with the PA meshes inserted. This can be attributed to the interlaminar toughening between aluminum alloy and GFRP layers by inserting PA meshes.</p>
収録刊行物
-
- 年次大会
-
年次大会 2019 (0), F04104-, 2019
一般社団法人 日本機械学会
- Tweet
キーワード
詳細情報 詳細情報について
-
- CRID
- 1390283659863480832
-
- NII論文ID
- 130007816006
-
- ISSN
- 24242667
-
- 本文言語コード
- ja
-
- データソース種別
-
- JaLC
- Crossref
- CiNii Articles
-
- 抄録ライセンスフラグ
- 使用不可