低変態温度溶接材料を用いた片面すみ肉溶接ルート部の疲労強度

DOI

書誌事項

タイトル別名
  • Fatigue strength of weld root in transverse attachment joints with single-sided weld using low transformation temperature welding consumable

抄録

<p>This study investigated the applicability of low transformation temperature (LTT) welding consumables to improve fatigue strength against weld root failure. Transverse attachment joints formed by single-sided welding were fabricated using an LTT welding consumable and conventional welding consumable. Fatigue tests with out-of-plane bending loads revealed that higher fatigue strength and fatigue limit can be achieved in the joint with an LTT consumable compared with a conventional one. In addition, residual stresses around the weld bead were clarified by X-ray diffraction measurements and finite element analyses. The results indicated that the LTT consumable can reduce tensile residual stress around the weld and also introduce compressive residual stress to the weld root.</p>

収録刊行物

詳細情報 詳細情報について

  • CRID
    1390283659870333824
  • NII論文ID
    130007830328
  • DOI
    10.11532/structcivil.66a.607
  • ISSN
    1881820X
  • 本文言語コード
    ja
  • データソース種別
    • JaLC
    • CiNii Articles
  • 抄録ライセンスフラグ
    使用不可

問題の指摘

ページトップへ