Effects of Cr and Si Contents on the Magnetic Properties of Fe-Cr-Si Soft Magnetic Alloys by MIM Process

DOI Web Site Web Site 3 Citations 14 References Open Access
  • KIMURA Masahiro
    Nippon Piston Ring Co.Ltd. Graduate School of Advanced Science and Technology, Tokyo Denki University
  • SHIMIZU Toru
    Graduate School of Science and Engineering, Tokyo Denki University
  • WATARI Hisaki
    Graduate School of Science and Engineering, Tokyo Denki University

Bibliographic Information

Other Title
  • MIMプロセスによって作製したFe-Cr-Si系軟磁性材料の磁気特性に及ぼすCrおよびSi量の影響
  • MIM プロセス ニ ヨッテ サクセイ シタ Fe-Cr-Siケイナンジセイ ザイリョウ ノ ジキ トクセイ ニ オヨボス Cr オヨビ Siリョウ ノ エイキョウ

Search this article

Description

<p>An electronic fuel injection system of automobiles have been commercialized at the end of 1960’s, they have been adopted as environmental measures for many automobiles and motorcycles. In recent years, metal injection molding (MIM) has been adopted as a process for manufacturing a solenoid valve which is a component of electronic fuel injector, and has been commercialized using PB permalloy. However, Ni that is an element of PB permalloy is expensive material, there was a problem that it is difficult to produce the product at low cost. As a solution to this problem, we can use Fe-Cr alloys, although there are few studies on Fe-Cr alloys by MIM process. In addition, when this materials are used in an alternating magnetic field, there is a problem that core loss increases in high frequency range.</p><p>In this study, we made MIM specimens using Fe-Cr-Si alloy powders containing Si in addition to Cr and investigated the influence of Cr and Si contents on the magnetic properties. These results revealed that high performance soft magnetic material can be obtained by setting the Si content 3% and reducing the Cr content.</p>

Journal

Citations (3)*help

See more

References(14)*help

See more

Keywords

Details 詳細情報について

Report a problem

Back to top