Evaluation of Deterioration Damage for Liquid Oxygen/Hydrogen Combustion Chamber of Copper Alloy by Replica Method for Oxide Film

DOI Web Site Web Site 参考文献3件
  • Shiwa Mitsuharu
    Research Center for Structural Materials, National Institute for Materials Science Faculty of Future Industry, Happy Science University
  • Hayakawa Masao
    Research Center for Structural Materials, National Institute for Materials Science
  • Hashimoto Tomoyuki
    Research and Development Directorate, Japan Aerospace Exploration Agency
  • Takegoshi Masao
    Research and Development Directorate, Japan Aerospace Exploration Agency
  • Sato Eiichi
    Institute for Space and Astronautical Science, Japan Aerospace Exploration Agency

この論文をさがす

抄録

<p>Non-destructive damage evaluation of rocket engine combustion chambers was carried out using a replica method that employs a rapid-setting silicone rubber molding agent. Scratch marks, grinding marks and the oxide film on the combustion side surface that developed after repeated burning tests were successfully transferred to a silicone rubber sheet, eliminating any need for complex surface treatment before examination. The sampled replicas showed traces of oxide film formation and the disappearance of the grinding marks and crack formations on the oxide films caused by to redox reactions during repeated use. The surface roughness of the light and dark lines parallel to the cooling channels and cracked oxide film was evaluated by laser scanning microscopy. We found the surface roughness parameter to be potentially useful for evaluating the level of damage sustained by reusable sounding rocket engines.</p><p> </p><p>This Paper was Originally Published in Japanese in J. Japan Inst. Met. Mater. 83 (2019) 176–180. Equation (2) and the captions of Figs. 1, 3, 4, 6, 7 were slightly changed.</p>

収録刊行物

  • MATERIALS TRANSACTIONS

    MATERIALS TRANSACTIONS 61 (9), 1889-1893, 2020-09-01

    公益社団法人 日本金属学会

参考文献 (3)*注記

もっと見る

キーワード

詳細情報 詳細情報について

問題の指摘

ページトップへ