Ti-Ni-Cu高成形性形状記憶合金を用いた,反力可変受動形触覚ディスプレイ用触知ピンの作製

書誌事項

タイトル別名
  • Fabriation of tactile pins for reaction force variable passive type tactile displays using high formable shape memory alloys

抄録

<p>We reported on the fabrication of tactile pins for reaction force variable passive type tactile displays using Ti-Ni-Cu high formable shape memory alloys. These devices take advantage of the temperature controllability of the resilience of the superelasticity effect and present hardness and softness tactile sensation. After the tactile pins being formed into three-dimensional shape by viscous flow of metallic glasses, they became shape memory alloys by annealing for crystallization. The height of tactile pin formed by conventional method was about 110 μm. However, when tactile pin was pushed by the finger, it was insufficient deformation for the stable superelasticity effect to appear. Therefore, we attempted to increase the height of tactile pin by the improving deformation method using rapidly temperature raising during forming for decreasing viscosity of metallic glasses. As a result, we successfully increased the height of tactile pin to 237 μm.</p>

収録刊行物

  • 年次大会

    年次大会 2020 (0), J22210-, 2020

    一般社団法人 日本機械学会

詳細情報 詳細情報について

問題の指摘

ページトップへ