鉄筋工事の加工と組み立てにおける作業能率に関する研究

書誌事項

タイトル別名
  • RESEARCH ON WORK EFFICIENCY IN MANUFACTURING AND ASSEMBLY OF REBAR CONSTRUCTION

この論文をさがす

抄録

<p>In this research, for the purpose of presenting a method for evaluating the efficiency of processing and assembly for reinforcing bar construction in an integrated manner, the work performed by technicians is quantitatively analyzed, and the work time, operation analysis, and labor cost are described. We think that the results of this research can be basic data for improving the efficiency of rebar construction.</p><p>Looking at the labor efficiency of the entire manufacturing process, the largest value is wall 4.93 (h / ton). Next, beam (thin) 4.27 (h / ton) is the largest. This is due to the large number of reinforcing bars and the number of tags that are both cut and bent, so it can be inferred that the setup work time is long in both the cutting and bending processes. The labor efficiency of setup is larger for thin reinforcing bars than for thick reinforcing bars. It can be inferred that the reason is that the thin reinforcing bars have a larger number of reinforcing bars and the number of tags for both cutting and bending, and the setup work time is longer in both the cutting and bending processes.</p><p>The efficiency is 0.8 (man-day / ton) for the beam, followed by 1.6 (man-day / ton) for the slab. The construction time of the beam is about 2.6 times that of the wall, and the efficiency is 0.8 the beam, which is about 2.2 times more efficient than the wall. Although it takes a long time to assemble the beam due to associated work such as distribution of reinforcing bars and movement of equipment, the weight per reinforcing bar is heavy, so the numerical value on the efficiency is evaluated efficiently. On the other hand, in the assembly of thin reinforcing bars such as walls and floors, the efficiency of numerical values on the efficiency is evaluated low despite the large proportion of main work.</p><p>The working time is 1/3 to 1/5 of the construction work, and the time per weight is about twice that of beams and columns for walls and floors. Based on these results, it is possible to point out the effectiveness of prefabrication at the manufacturing stage in order to improve the construction efficiency of walls and floors. For floors, increasing construction efficiency leads to a reduction in the number of temporary workers who are called as support, so it is thought that the effect of passing on the work time to the manufacturing stage is great. However, since it is expected that temporary storage and transportation efficiency will become issues, the need for technological development in these areas can be presented as an issue.</p><p>As a result of comparing the working hours per weight for each part, it was clarified that the distribution in manufacturing and the distribution in on-site construction site are different, and that improving the efficiency of thin reinforcing bars is a common issue in manufacturing and assembly. Since the instructions for manufacturing are based on the foreman's rebar list, the efficiency of the rebar construction may be affected by the foreman's ability to supervise the entire manufacturing and assembly. How to evaluate the integrated efficiency of such a single project and the efficiency of parallel manufacturing of multiple projects in a manufacturing plant is a future issue.</p>

収録刊行物

参考文献 (3)*注記

もっと見る

詳細情報 詳細情報について

問題の指摘

ページトップへ