レーザエッチングによるステンレス鋼の表面テクスチャリング

書誌事項

タイトル別名
  • Surface texturing of stainless steel engraved by laser etching
  • レーザエッチング ニ ヨル ステンレスコウ ノ ヒョウメン テクスチャリング

この論文をさがす

抄録

<p>This study examined surface texture engraved by laser irradiation in sulfuric acid solution. The Laser irradiation accelerates local corrosion in acid solution, and forms groove pattern. This process is called “Laser etching”. It shall be noted that the simple application of laser etching can merely create an entire surface corrosion. By applying passive potential, the groove depth of corrosion by laser irradiation became deeper than natural potential and area which was not irradiated by laser did not corrode. The groove depth of corrosion increased with increasing laser power and increasing scanning number of laser irradiation in 100 and 200 μm beam diameter. The groove width of corrosion decreased with increasing scanning speed of laser beam. Under the same laser power, groove width of corrosion by laser irradiation was approximately constant, but groove width of corrosion by laser in 100 μm beam diameter was smaller than 200 μm beam diameter under optimum laser power condition. From these results, tapered groove and multi grooves of corrosion can be formed by laser etching.</p>

収録刊行物

  • ばね論文集

    ばね論文集 2021 (66), 23-28, 2021-03-31

    日本ばね学会

参考文献 (11)*注記

もっと見る

詳細情報 詳細情報について

問題の指摘

ページトップへ