浸炭焼入れしたSAE4320鋼の転がり接触における残留オーステナイトの加工誘起マルテンサイト変態挙動
-
- Kanetani Kohei
- Material R&D Dept., JTEKT Corporation
-
- Moronaga Taku
- Electron Microscopy Analysis Station, National Institute for Materials Science
-
- Hara Toru
- Electron Microscopy Analysis Station, National Institute for Materials Science
-
- Ushioda Kohsaku
- Research Center for Structural Materials, National Institute for Materials Science Graduate School of Natural Science and Technology, Kanazawa University
書誌事項
- タイトル別名
-
- Deformation-Induced Martensitic Transformation Behavior of Retained Austenite during Rolling Contact in Carburized SAE4320 Steel
- シンタン ヤキイレ シタ SAE4320コウ ノ コロガリ セッショク ニ オケル ザンリュウ オーステナイト ノ カコウ ユウキ マルテンサイト ヘンタイ キョドウ
この論文をさがす
説明
<p>The deformation-induced martensitic transformation is a phenomenon that significantly improves the mechanical properties of steels, and is well known to be beneficial for the rolling contact fatigue (RCF) of bearings. In the present study, the characteristics of the deformation-induced martensitic transformation in the RCF of carburized, quenched and tempered SAE4320 steel were investigated in detail using scanning electron microscopy with electron backscattering diffraction and transmission electron microscopy with automated crystal orientation mapping. These analyses clarified that different variants of the extremely fine deformation-induced martensites as small as several tens of nm were formed within an austenite grain with RCF, and the martensites were speculated to have the Kurdumov-Sachs or the Nishiyama-Wasserman relationship with the retained austenite. Furthermore, the deformation-induced martensites were preferentially formed within the retained austenite grains rather than at the interface between the tempered martensite and retained austenite. This suggests that the deformation-induced martensites were formed from some localized regions that were plastically introduced within the retained austenite grains.</p>
収録刊行物
-
- ISIJ International
-
ISIJ International 61 (10), 2629-2635, 2021-10-15
一般社団法人 日本鉄鋼協会
- Tweet
キーワード
詳細情報 詳細情報について
-
- CRID
- 1390289719153847168
-
- NII論文ID
- 130007946191
- 130008104256
-
- NII書誌ID
- AN00151251
-
- ISSN
- 13475460
- 18832954
- 09151559
- 00211575
-
- NDL書誌ID
- 030803676
-
- 本文言語コード
- en
-
- データソース種別
-
- JaLC
- NDLサーチ
- Crossref
- CiNii Articles
- OpenAIRE
-
- 抄録ライセンスフラグ
- 使用不可