Stabilization of Resistive Wall Mode and Improved Plasma Performance in a Low-aspect-ratio Reversed Field Pinch by a Single Mode Control Power Supply System

Bibliographic Information

Other Title
  • 単一モード制御電源システムによる低アスペクト比RFPのRWM安定化とプラズマ性能改善
  • タンイツ モード セイギョ デンゲン システム ニ ヨル テイアスペクトヒ RFP ノ RWM アンテイカ ト プラズマ セイノウ カイゼン

Search this article

Abstract

<p>Stabilization of resistive wall modes (RWMs) is one of the important issues in magnetic fusion research. In the reversed field pinch (RFP), the number of unstable RWMs becomes smaller by lowering the aspect ratio (A), the ratio of the minor to major radius of the device. In REversed field pinch of Low-Aspect ratio eXperiment (RELAX), whose aspect ratio is 2, unstable m/n = 1/2 RWM was stabilized by a single mode control power supply system with improvements of discharge performance. In this paper we report new results with modified power supply system in which magnetic boundary condition near the poloidal gaps is controlled. The modified power supply system is designed to stabilize the most unstable m/n = 1/2 mode by use of the saddle coil array covering the whole torus with eight (8) power supplies. The results show that the discharge duration is improved from ∼ 3.0 ms to ∼ 4.0 ms, limited by the capability of the iron core in RELAX device. Stabilization of the dominant RWM with the resultant improved plasma performance by a single mode control power supply system shows one of the advantages of a low-aspect-ratio RFP concepts.</p>

Journal

References(17)*help

See more

Details 詳細情報について

Report a problem

Back to top