10 kW 級大容量ループヒートパイプの研究

DOI Web Site

書誌事項

タイトル別名
  • Study on a large capacity loop heat pipe with 10 kW-class heat transfer capability
  • 10kWキュウ ダイ ヨウリョウ ループヒートパイプ ノ ケンキュウ

この論文をさがす

説明

This paper describes a study on 10 kW-class Loop Heat Pipe (LHP) which is a two-phase heat transfer device. In this study, the 10 kW-class LHP was designed, fabricated, and tested. Condenser was cooled under stagnant water condition and forced water convection, and we evaluated steady state temperature. It was experimentally confirmed that this LHP can transport 9.5 kW heat in the steady state under stagnant water condition, a temperature of heater blocks being within 300°C. Then the thermal resistance at 9.5 kW was 0.006 °C/W. Finally, the steady experimental results were compared with calculation results and the maximum absolute error of heater blocks temperature was 22°C.

収録刊行物

関連プロジェクト

もっと見る

キーワード

詳細情報 詳細情報について

問題の指摘

ページトップへ