Semisolid-Liquid Fabrication of Cu–Cr Pseudobinary Alloy by Laser-Directed Energy Deposition

  • Zhu Zeyu
    School of Materials Science and Engineering, Dalian Jiaotong University
  • Li Zhiqiang
    School of Materials Science and Engineering, Dalian Jiaotong University
  • Lu Yunzhuo
    School of Materials Science and Engineering, Dalian Jiaotong University
  • Qin Zuoxiang
    School of Materials Science and Engineering, Dalian Jiaotong University
  • Lu Xing
    School of Materials Science and Engineering, Dalian Jiaotong University

この論文をさがす

抄録

<p>Copper–Chromium (Cu–Cr) pseudobinary alloys are promising materials for electrical application. Nevertheless, their fabrication remains limited by traditional techniques, which are not suitable for manufacturing homogeneous Cu–Cr alloys with uniformly distributed elements. Recently, semisolid-liquid manufacturing method has emerged as a promising technique route to fabricate Cu–Cr alloys. In this work, the laser-directed energy deposition (L-DED) as one of the laser additive manufacturing (LAM) technology, was successfully introduced for semisolid-liquid fabricating the homogeneous Cu–30 mass%Cr alloys. The obtained Cu–Cr alloys are constituted by fully melted Cu metallurgically combined with semisolid-liquid Cr. The close combination of Cu and Cr is benefit to improve the electrical conductivity of the alloy.</p>

収録刊行物

  • MATERIALS TRANSACTIONS

    MATERIALS TRANSACTIONS 64 (5), 1025-1028, 2023-05-01

    公益社団法人 日本金属学会

参考文献 (25)*注記

もっと見る

詳細情報 詳細情報について

問題の指摘

ページトップへ