書誌事項
- タイトル別名
-
- Evaluation of Fatigue Crack Propagation Behavior of Structural Steel with Different Thickness Using Digital Image Correlation Method
抄録
<p>In this paper, fatigue tests using SENT specimens with different thicknesses were carried out to evaluate the effect of plate thickness on the DIC measurements and fatigue crack propagation properties. The fatigue crack propagation rate da/dN of the thin specimen was slower than that of the thicker specimens. The crack opening/closure behaviors at the arbitrary crack location were evaluated by the crack opening displacement measured by the DIC. The crack opening load Pop was higher with thinner specimens, especially with shorter crack lengths. da/dN was correlated with effective stress intensity factor range ΔKeff based on the Pop at the fatigue crack tip, but the error increased with thinner plate thicknesses and longer crack lengths. The strain range at the fatigue crack tip measured by DIC showed a good correlation with da/dN, irrespective of the plate thickness and crack length.</p>
収録刊行物
-
- 材料
-
材料 72 (12), 852-857, 2023-12-15
公益社団法人 日本材料学会
- Tweet
キーワード
詳細情報 詳細情報について
-
- CRID
- 1390298521584309248
-
- ISSN
- 18807488
- 05145163
-
- 本文言語コード
- ja
-
- データソース種別
-
- JaLC
- Crossref
-
- 抄録ライセンスフラグ
- 使用不可