MASS PRODUCTION TRIAL OF 1700 MPA CLASS ULTRA-HIGH-STRENGTH BOLTS AND SLIP RESISTANCE OF FRICTION TYPE BOLTED JOINTS WITH THEM
-
- MORIYAMA Hitoshi
- 徳島大学大学院
-
- KIMURA Yuji
- 国立研究開発法人物質・材料研究機構 構造材料研究拠点
-
- YAMAGUCHI Takashi
- 大阪公立大学大学院工学研究科
-
- TSUZAKI Kaneaki
- 国立研究開発法人物質・材料研究機構 構造材料研究拠点
-
- MASUDA Hiroshi
- 宇都宮大学 地域デザイン科学部
-
- NAGASAKI Eiji
- 研究当時 大阪市立大学大学院 工学研究科
-
- QIN ZICE
- 大阪公立大学大学院 工学研究科
Bibliographic Information
- Other Title
-
- 1700MPa級超高力ボルトの量産試作およびそれを用いた摩擦接合継手のすべり耐力
Description
<p>Our research group has been developing 1,700 MPa class ultra-high-strength bolts and will try to rationalize bolted connections with the bolts. This study conducted mass production of 1,700 MPa class bolts and confirmed the tensile resistance experimentally. The slip behaviour of friction type bolted joints with them was also investigated. The mass-produced bolts demonstrated the stable tensile resistance derived from the used material. Slip test results of double-lap joints coated with inorganic zinc-rich paint found that the slip coefficient evaluated by the bolt tension before the test was larger than 0.45, and the bolt tension reduction through the slippage became less than about 3 percent.</p>
Journal
-
- Kou kouzou rombunshuu
-
Kou kouzou rombunshuu 30 (120), 120_115-120_127, 2024-01-26
Japanese Society of Steel Construction
- Tweet
Details 詳細情報について
-
- CRID
- 1390298599000958848
-
- ISSN
- 18840329
- 18809928
-
- Text Lang
- ja
-
- Data Source
-
- JaLC
- KAKEN
-
- Abstract License Flag
- Disallowed