Evaluation of Hydrochar from the Lignocellulose Component Using the Color Intensity

  • THAVORN Rittanupap
    Mechanical Engineering Program, Graduate School of Advanced Science and Engineering, Hiroshima University
  • KUBOON Sanchai
    National Nanotechnology Center, National Science and Technology Development Agency
  • CHARINPANITKUL Tawatchai
    Center of Excellence in Particle Technology, Faculty of Engineering, Chulalongkorn University
  • MATSUMURA Yukihiko
    Mechanical Engineering Program, Graduate School of Advanced Science and Engineering, Hiroshima University

抄録

<p>Hydrothermal carbonization (HTC) was conducted on cellulose, lignin, and xylose and their mixture in the composition of water hyacinth in the temperature range of 200‒280 °C for 2 h. The hydrochar product was analyzed for its mass yield, elemental composition, and color intensity. It was found that the intensities of red, green, and blue and brightness were similar and could be correlated with the higher heating value with an average relative error of 0.044. Elemental analysis and mass yield measurement indicated that the separation of carbon into solid and liquid phases was completed within 2 h, and the solid phase underwent relatively slow dehydration.</p>

収録刊行物

参考文献 (26)*注記

もっと見る

詳細情報 詳細情報について

問題の指摘

ページトップへ