Estimations of Cavitation Pressures in Dimpled Seal-type Thrust Bearings
-
- MIWA Reo
- 関東学院大学大学院
-
- ISHII Ryota
- 関東学院大学大学院
-
- MIYANAGA Norifumi
- 関東学院大学理工学部
-
- TSUJIMORI Atsushi
- 関東学院大学理工学部
-
- TOMIOKA Jun
- 早稲田大学理工学術院
Bibliographic Information
- Other Title
-
- ディンプルを有するシール型スラスト軸受におけるキャビテーション圧力の推定
Abstract
<p>This paper attempted to estimate the values of the cavitation pressures of seal-type thrust bearings with dimples of different diameters and depths, comparing experimental and analytical results. In the experiments, the oil film forces were measured for the various dimpled bearings with a fixed oil film thickness. The measured oil film forces were simulated by CFD analysis and the mass-conserving cavitation algorithm which implemented the JFO theory, using various cavitation pressures. In addition, cavitation pressures for a dimple were measured experimentally in various rotational speeds. As the results, the estimated cavitation pressures from the JFO analysis were slightly larger than those from CFD analysis. Cavitation pressure did not change much for the different dimple diameters, while it increased as the dimple depth increased. The measured cavitation pressure was generally consistent with the estimated results by CFD analysis, and it tended to increase gradually with increasing rotational speed.</p>
Journal
-
- JOURNAL OF JAPAN SOCIETY FOR DESIGN ENGINEERING
-
JOURNAL OF JAPAN SOCIETY FOR DESIGN ENGINEERING 59 (4), 169-182, 2024
Japan Society for Design Engineering
- Tweet
Details 詳細情報について
-
- CRID
- 1390299705003839616
-
- ISSN
- 21889023
- 09192948
-
- Text Lang
- ja
-
- Data Source
-
- JaLC
-
- Abstract License Flag
- Disallowed