スラリー焼成法によるCa<sub>3</sub>Co<sub>4</sub>O<sub>9</sub>酸化物熱電材料の作製と評価

DOI Web Site Web Site 参考文献9件

書誌事項

タイトル別名
  • Synthesis and Characterization of Ca<sub>3</sub>Co<sub>4</sub>O<sub>9</sub> Thermoelectric Ceramics using the Slurry Sintering Method
  • スラリー焼成法によるCa₃Co₄O₉酸化物熱電材料の作製と評価
  • スラリー ショウセイホウ ニ ヨル Ca ₃ Co ₄ O ₉ サンカブツ ネツデンザイリョウ ノ サクセイ ト ヒョウカ

この論文をさがす

抄録

<p>Ca3Co4O9 samples were made by the sintering method using the slurry consisted of Ca3Co4O9 powder and Ca3Co4(OH)18 hydroxide in binder solution. The preparation conditions for making the crack free samples were examined, and we found that using the slurry having a mixing ratio of Ca3Co4O9 powder to 13 wt.% or 18 wt.% Ca3Co4(OH)18 hydroxide in binder solution of 10:1.5, samples with a few crack could be prepared. From SEM observation, it was found that the void density in Ca3Co4O9 samples could be controlled by the slurry sintering method. The electric conductivity (σ), Seebeck coefficient (S), and power factor (PF) of samples prepared by slurry sintering method at room temperature are 53 S/cm, 118 µV/K and 73.8 µWm-1K-2, respectively. The power factor (PF) at 600 °C was 173 µWm-1K-2.</p>

収録刊行物

参考文献 (9)*注記

もっと見る

キーワード

詳細情報 詳細情報について

問題の指摘

ページトップへ