Fatigue Properties of Arc Welded Lap Joints of Joggled Steel Sheets

DOI Web Site

Bibliographic Information

Other Title
  • せぎり加工した鋼板の重ね隅肉溶接継手の疲労特性
  • セギリ カコウ シタ コウバン ノ カサネ スミニク ヨウセツ ツギテ ノ ヒロウ トクセイ

Search this article

Abstract

The fatigue properties of arc welded lap joints using joggle-shaped 980MPa-grade steel sheets were studied in a plane bending fatigue test. The fatigue strength of the joggled lap joints was superior to that of the conventional lap joints. The influences of joint geometry, residual stress, and hardness near the welds on the fatigue strength of the joints were investigated. It was found that the average values of flank angles and curvature radii at the weld toe of the joggled lap joints were greater than those of the conventional lap joints. Furthermore, histograms of flank angle and curvature radius indicated that the joggled lap joints had lower probability of crack initiation than that of the conventional lap joints in the low load stress region. Therefore, the fatigue strength of the joggled lap joints were considered to be improved.

Journal

Keywords

Details 詳細情報について

Report a problem

Back to top