サブマージアーク溶接による先組みビルトH梁端接合部の塑性変形能力

浅田 勇人, 中野 達也, 高塚 康平, 田中 剛, 田渕 基嗣

doi:10.11273/jssc.26.101_15

書誌事項

タイトル別名

PLASTIC DEFORMATION CAPACITY OF PRE-ASSEMBLED TYPE BUILT-UP H-SHAPED BEAM BY SUBMERGED ARC WELDING
(Full-scale sub-assemblage tests)
（実大部分架構実験）

説明

<p>This paper investigates on the plastic deformation capacity of built-up H-shaped beam connected with RHS column. A total of sixteen specimens was tested under cyclic loading, with beam size, notch toughness and depth of penetration of submerged arc weld (SAW) as primary test variables. Test results showed that the increase in notch toughness of SAW lead to improvement of plastic deformation capacity, while the decrease in weld penetration did not correlate to decrease in plastic deformation capacity. FEA were also performed to provide insight into the impact of the beam size and the penetration of SAW on the plastic deformation capacity of the specimens.</p>

収録刊行物

鋼構造論文集

鋼構造論文集 26 (101), 101_15-101_30, 2019-03-25

一般社団法人日本鋼構造協会

キーワード

詳細情報詳細情報について

CRID: 1390565134834454656

NII論文ID: 130007808076

DOI: 10.11273/jssc.26.101_15

ISSN: 18840329; 18809928

本文言語コード: ja

データソース種別

JaLC
CiNii Articles

抄録ライセンスフラグ: 使用不可

書き出し

問題の指摘