SiO<sub>2</sub>リッチサスペンション適用によるYbシリケートサスペンション溶射皮膜制御

  • 北原 匠
    東北大学大学院工学研究科附属先端材料強度科学研究センター
  • 柳岡 遼太郎
    東北大学大学院工学研究科附属先端材料強度科学研究センター
  • 市川 裕士
    東北大学大学院工学研究科附属先端材料強度科学研究センター
  • 小川 和洋
    東北大学大学院工学研究科附属先端材料強度科学研究センター
  • 益田 敬也
    (株)フジミインコーポレーテッド
  • 佐藤 和人
    (株)フジミインコーポレーテッド

書誌事項

タイトル別名
  • Control of Suspension Plasma Sprayed Yb Silicate coatings by means of SiO<sub>2</sub>-rich Suspension
  • SiO₂リッチサスペンション適用によるYbシリケートサスペンション溶射皮膜制御
  • SiO ₂ リッチサスペンション テキヨウ ニ ヨル Yb シリケートサスペンション ヨウシャ ヒマク セイギョ

この論文をさがす

抄録

As new materials for next-generation aircraft engines, SiC/SiC ceramic matrix composites (CMCs) are thought to be promising. The CMCs possess higher thermal resistance and lower density than those of conventional metallic materials. However, when exposed to oxidative steam environment, SiC/SiC CMCs will reduce the thickness resulting from oxidation reactions. Therefore, environmental barrier coatings (EBCs) are necessary to protect the surface of CMC components from water vapor. EBCs without cracks or pores are required so that water vapor will not reach the surface of CMC substrate. As a new deposition process, suspension plasma spraying (SPS) process is expected to produce much denser EBCs since much smaller powders can be supplied in this process. At the same time, however, SPSed powders are easily influenced by residence time in the plasma flame, resulting in evaporation of particular materials and phase transition of feedstock powders. In this study, SiO2-rich Yb silicate suspensions are applied to compensate for the evaporation of SiO2 during the process. Subsequently, the applicability of SiO2-rich SPSed EBCs was discussed.

収録刊行物

被引用文献 (2)*注記

もっと見る

詳細情報 詳細情報について

問題の指摘

ページトップへ