Thiol-ene-acrylate Ternary Photosensitive Resins for DLP 3D Printing
-
- Wang Chong
- School of Chemical and Material Engineering, Jiangnan University
-
- Wang Chen
- School of Chemical and Material Engineering, Jiangnan University
-
- Li Zhiquan
- School of Chemical and Material Engineering, Jiangnan University
この論文をさがす
説明
<p>Acrylate-based photosensitive resins for digital light processing (DLP) 3D printing generally suffer from large volumetric shrinkage, insufficient functionality conversion and heterogeneous networks. Based on thiol-ene click chemistry, we developed a series of thiol-ene-acrylate ternary formulations and systematically studied the effects of each composition on the photopolymerization kinetics and thermomechanical properties. The ternary systems exhibit very low viscosity (< 0.15 Pa·s) and sufficient thermal storage stability. The mechanical properties of the networks can be adjusted by simply altering the components ratio. With optimal parameters, the thiol-ene-acrylate ternary system can be applied to DLP 3D printing to fabricate delicate objects.</p>
収録刊行物
-
- Journal of Photopolymer Science and Technology
-
Journal of Photopolymer Science and Technology 33 (3), 285-290, 2020-07-01
フォトポリマー学会
- Tweet
詳細情報 詳細情報について
-
- CRID
- 1390566775148074496
-
- NII論文ID
- 130007867575
-
- NII書誌ID
- AA11576862
-
- ISSN
- 13496336
- 09149244
-
- NDL書誌ID
- 030413246
-
- 本文言語コード
- en
-
- データソース種別
-
- JaLC
- NDL
- Crossref
- CiNii Articles
-
- 抄録ライセンスフラグ
- 使用不可