平織炭素繊維強化熱可塑性ポリイミド複合材料の樹脂含浸および機械的特性に及ぼす成形条件の影響

DOI Web Site Web Site 参考文献1件 オープンアクセス

書誌事項

タイトル別名
  • Effect of Molding Condition on the Resin Impregnation and Mechanical Properties of Plain-Woven Carbon Fabric Reinforced Thermoplastic Polyimide Composites
  • ヒラオリ タンソ センイ キョウカ ネツ カソセイ ポリイミド フクゴウ ザイリョウ ノ ジュシ ガンシン オヨビ キカイテキ トクセイ ニ オヨボス セイケイ ジョウケン ノ エイキョウ

この論文をさがす

説明

<p>The effect of molding condition on the resin impregnation behavior and associated mechanical properties were investigated for plain woven carbon fabric reinforced thermoplastic polyimide composites. Resin impregnation was accelerated with increasing molding temperature and pressure. At molding temperatures above 410ºC, resin impregnation remained unchanged with change in temperature. Tensile test results indicated that modulus and strength increased with resin impregnation. Resin impregnation was predicted using analytical models and it was found that the analysis could successfully predict the impregnation behavior, despite the difference in molding pressure and temperature.</p>

収録刊行物

参考文献 (1)*注記

もっと見る

キーワード

詳細情報 詳細情報について

問題の指摘

ページトップへ