両振り衝撃ねじり荷重下におけるSCM435合金鋼の疲労強度について

書誌事項

タイトル別名
  • Fatigue Strength of SCM435 Alloy Steel under Fully Reversed Impact Torsional Load

この論文をさがす

説明

In order to investigate the fatigue strength behavior under fully reversed impact torsional load, two types of the impact fatigue tesing machines were newly developed. By using these testing machines, a series of experiments were carried out on a structural alloy steel JIS. SCM435. The following characteristics of impact torsional fatigue strength behaviors were revealed : (1) the fatigue strength of the plain specimen in impact fatigue is higher than that in non-impact fatigue in the entire range of this experiment ;(2) the fatigue strength of the hole-notched specimen in impact fatigue shows a trend to become lower comparing with the results in non-impact fatigue in high stress cycles region ; (3) the crack growth rate in impact fatigue is lower than in non-impact fatigue.

収録刊行物

  • 材料システム

    材料システム 6 (0), 181-188, 1987

    学校法人 金沢工業大学 材料システム研究所

詳細情報 詳細情報について

  • CRID
    1390571194129992320
  • NII論文ID
    130008104473
  • DOI
    10.34401/zairyosystem.6.0_181
  • ISSN
    24359734
    02866013
  • 本文言語コード
    ja
  • データソース種別
    • JaLC
    • CiNii Articles
  • 抄録ライセンスフラグ
    使用不可

問題の指摘

ページトップへ