定位置予圧における単列アンギュラ玉軸受のアキシアル荷重変化

DOI

書誌事項

タイトル別名
  • Study on Change of Axial Load of Single-Row Angular Contact Ball Bearings at Fixed Position Preload
  • (Influence of Contact Angle on change of Axial load)
  • （接触角がアキシアル荷重変化に与える影響）

抄録

<p>In the past research, it was clarified that the preload single-row angular contact ball bearings in the fixed position preload changes increase significantly due to thermal expansion. However, the amount of change in this preload is considered to depend on the contact angle. Therefore, in this study, three types of single-row angular contact ball bearings 7306 with different contact angles were assembled with fixed-position preload, and the change in preload during rotation was measured. As a result, it was clarified that the larger the contact angle, the larger the calorific value, and the larger the contact angle, the larger the preload release amount. In addition, no preload loss occurred when preload was repeated with an axial load smaller than the previous load.</p>

収録刊行物

  • 設計工学

    設計工学 56 (11), 595-606, 2021

    公益社団法人 日本設計工学会

キーワード

詳細情報 詳細情報について

  • CRID
    1390571426117023872
  • NII論文ID
    130008113954
  • DOI
    10.14953/jjsde.2021.2929
  • ISSN
    21889023
    09192948
  • 本文言語コード
    ja
  • データソース種別
    • JaLC
    • CiNii Articles
  • 抄録ライセンスフラグ
    使用不可

問題の指摘

ページトップへ