書誌事項
- タイトル別名
-
- Construction Method of Brushless and Commutatorless Motor Using Single-Phase Low-Frequency Induction Type Machine
- タンソウ テイシュウハヨウ ユウドウ コケイ カイテンキ オ モチイタ ム ブ
この論文をさがす
説明
Previously, we had tried to improve the inductor type high-frequency generator to apply to the commercial frequency range, paying attention to the fact that it is a brushless machine. It has many remarkable features in the structure compared with the ordinary rotating machine. The magnetic field acts along the axial direction. The armature coils are wound in the form of solenoid on the iron cores that are arranged in parallel along the axial direction with proper distance along the periphery of the stator. The shape of magnetic pole piece is choiced so that it can maintain easily the sufficient contrast of the sparseness and denseness of magnetic flux. In this paper, we will explain a method of construction of a brushless and commutatorless motor which uses the low-frequency single-phase inductor machine with the series diode system thyristor bridge inverter. In this case, it is a remarkable feature to be able to eliminate the distributor which is using in the usual commutatorless motor. Instead of the distributor, the e.m.f. induced in the pilot winding, which is wound separately on the armature core, is used to detect the position of the rotor. Therefore, the position detector becomes very simply, but its function is exact under the various loads. Moreover, we will refer to a determining method of revolving direction and a counterplan to prevent rotor from falling into dead point.
収録刊行物
-
- 山梨大學工學部研究報告
-
山梨大學工學部研究報告 28 10-15, 1977
山梨大学工学部
- Tweet
詳細情報 詳細情報について
-
- CRID
- 1390572174732430976
-
- NII論文ID
- 110000217590
-
- NII書誌ID
- AN0024491X
-
- NDL書誌ID
- 1920567
-
- ISSN
- 05131871
-
- 本文言語コード
- ja
-
- データソース種別
-
- JaLC
- IRDB
- NDL
- CiNii Articles