EXPERIMENTAL STUDY ON PULL-OUT BEHAVIOR OF REINFORCING BARS IN RC EXTERIOR BEAM-COLUMN JOINT BY FBG SENSING
-
- FUJII Tomoya
- Former Graduate School of Eng., Osaka Univ.
-
- SANADA Yasushi
- Graduate School of Eng., Osaka Univ.
-
- YOON Rokhyun
- Graduate School of Eng., Osaka Univ.
-
- KANEKO Yoshiki
- Former Graduate School of Eng., Osaka Univ.
-
- HASEGAWA Sota
- Graduate School of Eng., Osaka Univ.
-
- MATSUMOTO Yukihiro
- Graduate School of Eng., Toyohashi Univ. of Technology
-
- MATSUI Tomoya
- Graduate School of Eng., Toyohashi Univ. of Technology
-
- SAKUTA Joji
- Horie Engineering and Architectural Research Institute Co., Ltd.
-
- ADACHI Tomohiro
- Tokyo Tekko Corporation, Ltd.
Bibliographic Information
- Other Title
-
- 光ファイバ計測によるRCト形柱梁接合部の主筋定着部の引抜き挙動に関する実験的分析
Abstract
<p>The present study focuses on the pull-out behavior of beam longitudinal rebar with bending and mechanical anchorage from a typical reinforced concrete (RC) exterior beam-column joint. In particular, an optical fiber sensing using the fiber bragg grating (FBG) sensors was applied to experimentally measure the strain behavior of reinforcing bars pulled out. Consequently, the bond behavior between the reinforcing bars and concrete measured by the FBG sensors was significantly different from that by conventional strain gauges. The obtained test results can contribute to clarify the anchorage mechanisms.</p>
Journal
-
- AIJ Journal of Technology and Design
-
AIJ Journal of Technology and Design 28 (68), 197-202, 2022-02-20
Architectural Institute of Japan
- Tweet
Details 詳細情報について
-
- CRID
- 1390572633001378560
-
- NII Article ID
- 130008161875
-
- ISSN
- 18818188
- 13419463
-
- Text Lang
- ja
-
- Data Source
-
- JaLC
- Crossref
- CiNii Articles
-
- Abstract License Flag
- Disallowed