In-situ XRD測定を用いた1200アルミニウムにおける引張変形中の転位下部組織変化の評価

  • 足立 大樹
    兵庫県立大学 大学院工学研究科 材料・放射光工学専攻
  • 高橋 駿介
    兵庫県立大学 大学院工学研究科 材料・放射光工学専攻大学院生
  • 平田 雅裕
    兵庫県立大学 大学院工学研究科 材料・放射光工学専攻大学院生
  • 岡井 大祐
    兵庫県立大学 大学院工学研究科 材料・放射光工学専攻

書誌事項

タイトル別名
  • Evaluation of change in dislocation substructure during tensile deformation in 1200 aluminum by using In-situ XRD measurement

この論文をさがす

説明

<p>The work hardening of aluminum alloys depends on the dislocation substructure in addition to the dislocation density. In this study, in-situ XRD measurements during tensile deformation were conducted on cold-rolled 1200 aluminum and change in the dislocation substructure was evaluated by analysis using Convolutional Multiple Whole Profile method. As a result, the dislocation cell structure was formed before tensile test and when the stress exceeded 32 MPa, the dislocation cell structure decomposed and the dislocation dispersion approached uniformly. It is considered that 32 MPa is a micro-yield stress at which the initial dislocations start to move. As the plastic deformation progressed, dislocation arrangements parameter decreased and finally became 0.5, it is considered that the dislocation cell structure was formed again.</p>

収録刊行物

  • 軽金属

    軽金属 72 (5), 274-276, 2022-05-15

    一般社団法人 軽金属学会

被引用文献 (2)*注記

もっと見る

参考文献 (6)*注記

もっと見る

詳細情報 詳細情報について

問題の指摘

ページトップへ