電子ビーム粉末床溶融結合法で作製した<i>γ</i>-TiAl合金積層造形体の特異バンド状組織に及ぼす投入エネルギー密度の影響

  • 趙 研
    大阪大学 大学院工学研究科 マテリアル生産科学専攻 大阪大学 大学院工学研究科 異方性カスタム設計・AM研究開発センター
  • 森田 尚秀
    大阪大学 大学院工学研究科 マテリアル生産科学専攻
  • 松岡 弘剛
    大阪大学 大学院工学研究科 マテリアル生産科学専攻
  • 安田 弘行
    大阪大学 大学院工学研究科 マテリアル生産科学専攻 大阪大学 大学院工学研究科 異方性カスタム設計・AM研究開発センター
  • 當代 光陽
    新居浜工業高等専門学校 環境材料工学科
  • 上田 実
    金属技研株式会社
  • 竹山 雅夫
    東京工業大学 物質理工学院
  • 中野 貴由
    大阪大学 大学院工学研究科 マテリアル生産科学専攻 大阪大学 大学院工学研究科 異方性カスタム設計・AM研究開発センター

書誌事項

タイトル別名
  • Influence of input energy density on morphology of unique layered microstructure of <i>γ</i>-TiAl alloys fabricated by electron beam powder bed fusion
  • 電子ビーム粉末床溶融結合法で作製したγ-TiAl合金積層造形体の特異バンド状組織に及ぼす投入エネルギー密度の影響
  • デンシ ビーム フンマツショウ ヨウユウ ケツゴウホウ デ サクセイ シタ g-TiAl ゴウキン セキソウ ゾウケイタイ ノ トクイ バンドジョウ ソシキ ニ オヨボス トウニュウ エネルギー ミツド ノ エイキョウ

この論文をさがす

抄録

<p>Microstructure and tensile properties of Ti-48Al-2Cr-2Nb (at%) rods fabricated by electron beam powder bed fusion (EB-PBF) process were investigated by changing input energy density (ED) which is one of the important factors affecting formation of the melt pool. We found that unique layered microstructure consisting of an equiaxed γ grain layer (γ band) and a duplex region can be formed by EB-PBF with ED in the range of 13 to 31 J/mm3 . It is interesting to note that the width of the γ band and the volume fraction of the γ phase in the duplex region decrease with increasing ED. On the other hand, the α2 lamellar grain in the duplex region increases with increasing ED. These morphological changes in the layered microstructure are attributed to variation of temperature distribution from melt pool caused by increasing ED. Moreover, we also found for the first time the strength of the alloys can be improved by decreasing width of the γ band and increasing of the α2 lamellar grain in the duplex region. Whereas, the width of the γ band and the fraction of the equiaxed γ grain in the duplex region should be increased to enhance ductility of the alloys.</p>

収録刊行物

  • 軽金属

    軽金属 72 (6), 298-303, 2022-06-15

    一般社団法人 軽金属学会

参考文献 (43)*注記

もっと見る

関連プロジェクト

もっと見る

詳細情報 詳細情報について

問題の指摘

ページトップへ