Cu基三元系合金を用いて作製したNb₃Sn超伝導線材におけるIn添加と熱処理温度の影響

DOI Web Site

書誌事項

タイトル別名
  • Effect of in Addition and Heat Treatment Temperature on Nb₃Sn Superconducting Wire Prepared Using Cu–Based Ternary Alloy
  • Cuキ サンゲンケイ ゴウキン オ モチイテ サクセイ シタ Nb ₃ Sn チョウデンドウ センザイ ニ オケル In テンカ ト ネツ ショリ オンド ノ エイキョウ

この論文をさがす

説明

<p>Nb₃Sn high–field superconducting coil generates a strong magnetic field for confinement of a fusion plasma in an International Thermal Fusion Reactor (ITER). Nb₃Sn wire rods have excellent high magnetic field characteristics and good mass productivity, while in real environments, damage to the wire rod due to mechanical and thermal deformation is large, and deterioration of the critical current density (Jc) is a problem. It is reported that addition of In showed improvement in Jc as well as increase in strength by solid solution compared with addition of Zn. In this study, three types of wire rods, Nb/Cu–16Sn–0.3Ti, Nb/Cu 14Sn–2In–0.3Ti and Nb/Cu–10Sn–5In–0.3Ti, were prepared and the effect of In addition on the microstructure of Nb₃Sn filament was investigated．</p>

収録刊行物

キーワード

詳細情報 詳細情報について

問題の指摘

ページトップへ