曲げモーメントに着目したL形RC部材接合部の耐力算定方法

DOI

書誌事項

タイトル別名
  • Method of calculating load capacity of L-shaped RC joint parts focusing bending moment

抄録

<p>The civil engineering field has not yet developed a load capacity equation for the failure of member joints, and the design of member joints is not based on performance verification. On the other hand, in the field of architecture, a formula for calculating the bearing capacity of member joints has been proposed. Therefore, in this study, we focused on L-shaped joint parts and made some modifications to the existing macro model. The results of the calculations were compared with those of previous experiments to evaluate the modified macro model. As a result, it was confirmed that the calculated values were within ±20% of the experimental values for the L-shaped specimens, which were judged to be of the joint failure type and the joint failure type after bending yielding.</p>

収録刊行物

詳細情報 詳細情報について

  • CRID
    1390577199128988416
  • DOI
    10.11532/structcivil.69a.839
  • ISSN
    1881820X
  • 本文言語コード
    ja
  • データソース種別
    • JaLC
  • 抄録ライセンスフラグ
    使用不可

問題の指摘

ページトップへ