熱力学的自己抑制効果と壁面加熱がノズル内キャビテーションに及ぼす影響

  • 佐藤 航太
    東北大学大学院工学研究科機械機能創成専攻 東北大学流体科学研究所
  • 岡島 淳之介
    東北大学流体科学研究所 Corresponding author

書誌事項

タイトル別名
  • Influence of Thermodynamic Self-suppression Effect and Wall Heating on Cavitation in a Nozzle
  • ネツリキガクテキ ジコ ヨクセイ コウカ ト ヘキメン カネツ ガ ノズル ナイ キャビテーション ニ オヨボス エイキョウ

この論文をさがす

抄録

<p>To clarify the thermal aspect of cavitating flow, cavitation experiments were conducted using a heated nozzle with different mainstream temperatures and heating conditions to evaluate two thermal effects that affect the cavity. The decrease in cavity length was observed due to the thermodynamic self-suppression effect by increasing the mainstream temperature, and the cavity length increased by heating from the wall. By comparing the variation of cavity length in the non-heated and heated conditions, the condition balancing the two thermal effect was found. Additionally, the response of each thermal effect to the mainstream temperature was also found. It was also shown that the required wall superheat to cancel out thermodynamic self-suppression effect reaches a maximum value when the mainstream temperature is around 70 °C. The experimental results were compared and discussed with the mathematical model values for the two thermal effects.</p>

収録刊行物

  • 混相流

    混相流 37 (1), 86-93, 2023-03-15

    日本混相流学会

参考文献 (8)*注記

もっと見る

詳細情報 詳細情報について

問題の指摘

ページトップへ