Oxide and Heat Treatment Microstructure Evolution of Melted Mark on Copper Wire under Various Heat Treatment Conditions

DOI Web Site Web Site 参考文献22件

この論文をさがす

説明

<p>A technique, which can explain the behavior of fires by using microstructural and oxide examinations of melted marks on copper wire, has been required for fire investigators. However, a study on the microstructural and oxide evolution after a fire is insufficient due to various and complicated fire conditions. In this research, changes in surface morphology, oxide layer thickness, oxidation kinetics, and microstructure were investigated at various annealing temperatures and times on the melted mark on the copper wire. The results show that the copper dendrites surrounded by (Cu+Cu2O) eutectic structure under Cu2O and CuO surface is the fingerprint of melted mark on copper wire annealed between 220°C and 600°C. At an annealing temperature of 800°C to 1000°C, the characteristic microstructure of the melted mark is Cu2O precipitates without dendrites in grains under a single layer of Cu2O. Moreover, the diffusion processes contributed to Cu2O growth could be as follows: lattice diffusion at 220°C to 400°C and grain boundary diffusion at 400°C to 1000°C.</p>

収録刊行物

  • MATERIALS TRANSACTIONS

    MATERIALS TRANSACTIONS 64 (9), 2302-2308, 2023-09-01

    公益社団法人 日本金属学会

参考文献 (22)*注記

もっと見る

キーワード

詳細情報 詳細情報について

問題の指摘

ページトップへ