鉄骨溶接へのフラッシュ溶接の適用性に関する研究

DOI

書誌事項

タイトル別名
  • Study on Applicability of Flash Welding Process for Steel Flame
  • Application to large-section welding and mechanical properties
  • 大断面溶接へ適用と力学性状

抄録

<p>This research has aimed to construct the fully automated high speed joining system with the end of the joining instantaneously, and enabling the application of the flash welding which does not require the skill to building structures. As for this joining method, the electric capacity for joining and weight of the device is too large to apply the flash welding to large section members and site joints. In order to decrease electric capacity, basic experiments were conducted with parameters of the current and the flash time. As a result, it was confirmed to be able to join steel materials of the circular cross section of 200cm2 in the sectional area in electric capacity of 1/50 or less compared with the past. Moreover, it was confirmed that the joint of the H-shaped steels and the box section steels were also possible.</p>

収録刊行物

  • 鋼構造論文集

    鋼構造論文集 30 (120), 120_1-120_8, 2024-01-26

    一般社団法人 日本鋼構造協会

キーワード

詳細情報 詳細情報について

  • CRID
    1390580073977656960
  • DOI
    10.11273/jssc.30.120_1
  • ISSN
    18840329
    18809928
  • 本文言語コード
    ja
  • データソース種別
    • JaLC
  • 抄録ライセンスフラグ
    使用不可

問題の指摘

ページトップへ