TiNi 形状記憶合金ワイヤーの疲労特性に与える超音波ショットピーニングの影響

書誌事項

タイトル別名
  • Influence of Ultrasonic Shot Peening on Fatigue Life of TiNi Shape Memory Alloy Wire
  • TiNi ケイジョウ キオク ゴウキン ワイヤー ノ ヒロウ トクセイ ニ アタエル チョウオンパ ショットピーニング ノ エイキョウ

この論文をさがす

抄録

<p>The influence of ultrasonic shot peening (USP) on the rotating-bending fatigue life and the initiation point of the fatigue crack of shape memory alloy (SMA) wire were investigated. The effect of the compressive residual stress on the fatigue life of USP-treated SMA wire was discussed. The results obtained are summarized as follows. (1) The effect of the USP to the fatigue life of SMA is large in the small strain and slight in the large strain. (2) In the case of the USP-treated wire with coverage of 2000% and 4000%, the compressive residual stress cannot be measured around the surface. The structure on the surface may become the amorphous. (3) In the initiation point of the fatigue crack, the larger the coverage, the larger the ratio of the appearance of fatigue crack in the specimen surface is.</p>

収録刊行物

  • ばね論文集

    ばね論文集 2019 (64), 33-37, 2019-03-31

    日本ばね学会

詳細情報 詳細情報について

問題の指摘

ページトップへ