急冷処理用冷却材としてのナノ流体の有効性評価

DOI Web Site Web Site 被引用文献1件 参考文献26件
  • 梅原 裕太郎
    電気通信大学大学院情報理工学研究科機械知能システム学専攻
  • 大川 富雄
    電気通信大学大学院情報理工学研究科機械知能システム学専攻
  • 榎木 光治
    電気通信大学大学院情報理工学研究科機械知能システム学専攻

書誌事項

タイトル別名
  • Evaluation of the Performance of Nanofluid as Quenching Coolant
  • キュウレイ ショリヨウ レイキャクザイ ト シテ ノ ナノ リュウタイ ノ ユウコウセイ ヒョウカ

この論文をさがす

説明

<p>Nanofluid is a liquid in which nanometer-sized particles are dispersed in base liquid. It is known that the critical heat flux and the wall superheat at the minimum heat flux in pool boiling are improved in nanofluids. In this research, performance of silica-water nanofluid as quenching coolant is explored experimentally since the above-mentioned parameters play important roles in this application. First, we investigated the immersion cooling of high-temperature test piece in the nanofluid; here, the test piece was cylindrical in shape and made of Inconel 718 or SUS304. It was confirmed that the test piece is cooled faster in the nanofluid than in distilled water. It was also found that non-uniformity of temperature in the test piece during quenching is mitigated in the nanofluid. This indicates that the silica nanofluid is considered a promising coolant to avoid the occurrence of hardening crack during quenching. Finally, Vickers hardness test was done for the Inconel 718 test piece. It was shown that the hardness tends to increase with an increase in the cooling rate even under the high cooling rate of about 1000 K/min although the difference of hardness was not noticeable between the experiments using the distilled water and the silica nanofluid as the quenching coolant.</p>

収録刊行物

  • 鉄と鋼

    鉄と鋼 105 (11), 1050-1058, 2019

    一般社団法人 日本鉄鋼協会

被引用文献 (1)*注記

もっと見る

参考文献 (26)*注記

もっと見る

キーワード

詳細情報 詳細情報について

問題の指摘

ページトップへ