書誌事項
- タイトル別名
-
- The Application of Etched Aluminum Wires as Catalyst Supports for Methanol Steam-Reforming
- エッチングアルミニウムワイヤー ショクバイタンタイ ノ メタノール カイシツ ハンノウ エ ノ オウヨウ
この論文をさがす
抄録
<p>In the present work, we investigated the alternating current (AC) etching of aluminum wires with the aim of fabricating catalyst supports. This support material was found to possess a spongy surface layer that could be subsequently filled with γ-alumina by a combination of hydration and calcination. These support wires are easily fabricated at low cost, and could be mass produced continuously. The integrated structure of the catalyst produces a strong interconnection between the wire substrate and a thick catalyst layer on the wire. This work also demonstrated that the diffusion inside the catalyst layer can be controlled by varying the etched structure of the support layer. A micro-structured catalytic wall reactor concept was developed using these wires, situated parallel to one another within a tubular device, such that microchannels were present between the wires. The steam-reforming of methanol was assessed in this type of microreactor.</p><p> </p><p>Mater. Trans. 58(2017) 782-789に掲載</p>
収録刊行物
-
- 日本金属学会誌
-
日本金属学会誌 82 (7), 240-248, 2018-07-01
公益社団法人 日本金属学会
- Tweet
キーワード
詳細情報 詳細情報について
-
- CRID
- 1390845712968667392
-
- NII論文ID
- 130007410537
-
- NII書誌ID
- AN00187860
-
- ISSN
- 18806880
- 24337501
- 00214876
-
- NDL書誌ID
- 029144691
-
- 本文言語コード
- ja
-
- データソース種別
-
- JaLC
- NDL
- Crossref
- CiNii Articles
-
- 抄録ライセンスフラグ
- 使用不可