PULLOUT TEST OF POST-INSTALLED ANCHORS IN LOW STRENGTH CONCRETE WITH BRICK CHIPS REPRESENTING BANGLADESHI CONCRETE
-
- WARDI Syafri
- Graduate School of Engineering, Osaka Univ.
-
- SAHA Nandita
- Graduate School of Engineering, Osaka Univ.
-
- SANADA Yasushi
- Graduate School of Engineering, Osaka Univ.
-
- TAKAHASHI Susumu
- Faculty of Engineering, Daido Univ.
Bibliographic Information
- Other Title
-
- バングラデシュのレンガチップを用いた低強度コンクリートを想定したあと施工アンカーの引き抜き実験
Search this article
Abstract
<p>A series of pullout tests was conducted to evaluate the tensile capacity of single post-installed anchors in low strength concrete. This study focused on application of bonded anchors which were installed on a half-scale RC slab made using low strength concrete with brick chips for coarse aggregate representing Bangladeshi concrete. This paper reports the pullout test results of five types of anchor specimens with different diameters and embedment lengths. The experimental tensile capacity of all specimens was higher than calculation using equations in Japanese guidelines, indicating that Japanese guidelines conservatively estimate the tensile capacity of bonded anchors in Bangladeshi concrete. </p>
Journal
-
- AIJ Journal of Technology and Design
-
AIJ Journal of Technology and Design 25 (59), 199-204, 2019-02-20
Architectural Institute of Japan
- Tweet
Details 詳細情報について
-
- CRID
- 1390845713054448512
-
- NII Article ID
- 130007602007
-
- NII Book ID
- AN10531441
-
- ISSN
- 18818188
- 13419463
-
- NDL BIB ID
- 029521995
-
- Text Lang
- ja
-
- Data Source
-
- JaLC
- NDL
- Crossref
- CiNii Articles
-
- Abstract License Flag
- Disallowed